Cart (0) -

Products

Wind-Up Stands
  • Facebook
  • LINE
  • X
  • LinkedIn
KUPO Jumbo Stand - 2 Sections
KUPO Jumbo Stand - 2 Sections for attaching to The eyelets of Stand to teThe r The Top of Stand to ground with The ropes. (Optional) KUPo Jumbo Stand - 2 Sections KUPo 721 And 756M
KUPO Jumbo Stand - 2 Sections
for attaching to The eyelets of Stand to teThe r The Top of Stand to ground with The ropes. (Optional)
KUPo Jumbo Stand - 2 Sections
KUPo 721 And 756M

721M

KUPO Jumbo Stand - 2 Sections

Specification
- 1 riser, 2 sections
- Column Dia.meter: 70mm, 60mm
- Finish: Chrome Plated Steel Column, Aluminum Leg
- Loading Weight: 100kg (220lbs)
- Weight: 31.55kg (63.1lbs)
- Closed Length: 127.5cm (50.2')
- Minimum Operating Height: 108cm (42.52"')
- Maximum Height: 172cm (67.7")
- Footprint Dia.meter: 120cm (47.2")
- Tube Dia.: 30x30mm
- Stand Top: 28mm Receiver With Wind Brace Bracket
- Included Caster Set Dia 152mm (6")
- With Detachable Ratcheted Crank Handle
Please contact us to check the stock availability before placing the order!



closed length
127.5cm
50.2"


maximum height
172cm
67.7"


minimum operating height
108cm
42.52"


weight
31.55kg
63.1lbs


footprint diameter
120cm
47.2"


maximum load<br>
100kg
220lbs


stand top
28mm Receiver With Wind Brace Bracket


Suggested Casters
KC-160C
(Included)


View More Details
The KUPO two-section heavy-duty hand-cranked stand has a load capacity of up to 100kg and a minimum working height of only 108cm, making it easy to store equipment. With a spread diameter of only 106cm, it is especially suitable for Layer truss paltform. The overall structure is composed of iron telescopic tubes, aluminum alloy columns and foot tubes. The head has a 28mm female socket with a fixed ring around it. The hand-cranked mechanism has a gear plate, and the ratchet handle can be inserted and rotated according to the arrow instructions to adjust the height. The ergonomic large handle provides comfort and makes it easier to apply force, and it also has an anti-backlash device to prevent equipment from falling suddenly and causing danger. Each telescopic tube has a maximum extension marking line to avoid exceeding the safe extension height. The handle is detachable and can be stored in the storage slot on the upper seat when not in use, to prevent damage to the handle and hand-cranked mechanism during transportation. The upper seat storage slot has a safety latch design to prevent the handle from accidentally falling out. The upper seat is equipped with a level gauge to facilitate confirmation of the levelness of the stand. The lower seat has dual handles for easy folding of the stand, with 30x30mm square foot tubes to ensure the strength and stability of the stand. It comes with 6" brake casters KC-160C for easy movement of the stand. The stand is assembled with stainless steel screws and nuts to ensure strength and prevent rust.
- With a spread diameter of only 106cm, it is especially suitable for Layer truss paltform
- Load capacity up to 100kg and delivers a maximum working height of 1.72m
- Oversize big handle on each riser for biggest torque
- Brace on leg made of rectangular steel tubing for maximum stability and safety
- Dual handle equipped on bottom spider casting for easily folding the base











Loading...